Ordering a kayak
The standard kayak also comes with a back rest, footrests, all recessed deck fittings, deck lines and a wire skeg. A rope skeg can be fitted instead for no additional costs if requested.
The standard kayaks are available in yellow, orange, red, blue,
quill, white and bright green.
Please use the colour chooser to see which colour you prefer.
Our kayaks can be bought from any of our dealers around the world.
If you would like a custom colour you can get a rough indication of how your colour scheme will look like by using the colour chooser.
When you have decided the colours from the colour chooser, please select the RAL colour.
As monitors may show colours differently, especially darker shades, you may want to check your choice on a printed RAL chart. Please contact your shop.
When ordering a custom bulkhead, please provide the measurement from the front edge of the keyhole cockpit to the front bulkhead.
The bulkhead will be fitted vertically unless otherwise stated upon ordering. Please note that the bulkhead is fibre glassed on one side only.
When ordering a foot pump we will add 4 inches (10 cm) onto the inside leg measurements you supply.
If a deck pump (hand operated) is needed, then we need to fit a recess for the pump at the time of construction.
The custom kayaks can be fitted with a hydraulic skeg or a hydraulic skeg-rudder. Of course they can also be fitted with the standard kayak's wire or rope skeg.
Please contact Sea Kayaking UK if you require any help or information.